Skip to content
Chemistry

Chemistry Words That Start With S

By V Y Published 27 Aug 2024 Updated 11 Nov 2026 31 min read
Entry typeChemistry
Last updated11 Nov 2026
EditorV Y

Chemistry has an unusually rich vocabulary beginning with S.

On this page
  1. Quick Answer
  2. Chemical Elements That Start With S
  3. Samarium
  4. Scandium
  5. Seaborgium
  6. Selenium
  7. Silicon
  8. Silicon vs Silicone
  9. Silver
  10. Silver Nitrate
  11. Sodium
  12. Sodium Chloride
  13. Sodium Hydroxide
  14. Sodium Carbonate
  15. Strontium
  16. Sulfur
  17. Sulfuric Acid
  18. Sulfur Dioxide

Some of the words appear in the first few chapters of almost any chemistry course: salt, solution, solute, solvent, solid, strong acid and stoichiometry. Others belong to more specialised areas, including stereochemistry, spectroscopy, spin, surface chemistry, superconductivity and saponification.

S is also well represented on the periodic table. Nine current element names begin with S, including silicon, silver, sodium, sulfur and strontium.

This guide explains the most useful chemistry words beginning with S, with definitions, examples and distinctions that are easy to miss in a simple alphabetical list.

Quick Answer

Useful chemistry words beginning with S include:

salt — ionic compound formed from cations and anions
salt bridge — ionic connection between half-cells in an electrochemical cell
samarium — element 62, symbol Sm
saponification — base-promoted hydrolysis of an ester, especially in soap making
saturated solution — solution containing the equilibrium amount of dissolved solute
scandium — element 21, symbol Sc
seaborgium — synthetic element 106, symbol Sg
selenium — element 34, symbol Se
sigma bond — bond formed by head-on orbital overlap
silica — silicon dioxide, SiO₂
silicate — compound containing silicon-oxygen structures
silicon — element 14, symbol Si
silver — element 47, symbol Ag
single bond — bond of formal order one
sodium — element 11, symbol Na
solid — state of matter with structural rigidity
solidification — liquid-to-solid phase transition
solubility — composition of a saturated solution expressed for a solute in a solvent
solubility product — equilibrium constant associated with dissolution of a sparingly soluble solid
solute — substance dissolved in a solution
solution — homogeneous mixture containing one or more dissolved components
solvent — component that acts as the dissolving medium
specific heat capacity — energy required to raise the temperature of unit mass by one degree
spectator ion — ion present but unchanged in the net ionic reaction
spectrometer — instrument used to measure or analyse a spectrum
spectrophotometer — instrument measuring light intensity as a function of wavelength
spectroscopy — study of interaction between matter and electromagnetic radiation or other spectral phenomena
spin — intrinsic quantum property of particles
standard hydrogen electrode — reference electrode assigned a standard potential of zero
standard solution — solution of accurately known concentration
standard state — defined reference state used for thermodynamic quantities
stereochemistry — study of three-dimensional molecular arrangement
stereoisomer — compound with the same connectivity but different spatial arrangement
stock solution — concentrated solution used to prepare more dilute solutions
stoichiometry — quantitative relationship between reactants and products
strontium — element 38, symbol Sr
strong acid — acid that is essentially completely ionised under specified aqueous conditions
strong base — base that reacts essentially completely under the specified conditions
strong electrolyte — substance producing ions extensively in solution
sublimation — direct solid-to-vapour phase transition
subshell — subdivision of an electron shell
substituent — atom or group replacing hydrogen or another group in a parent structure
substitution reaction — reaction in which one group is replaced by another
substrate — chemical species acted upon in a reaction or catalytic process
sulfate — sulfur oxyanion SO₄²⁻
sulfide — compound containing sulfur in a low oxidation state, often S²⁻ in ionic compounds
sulfite — sulfur oxyanion SO₃²⁻
sulfur — element 16, symbol S
sulfuric acid — H₂SO₄
supercritical fluid — substance above its critical temperature and pressure
supersaturated solution — solution containing more dissolved solute than its equilibrium solubility
surface tension — tendency of a liquid surface to resist expansion
surfactant — substance that accumulates at interfaces and reduces interfacial tension
suspension — heterogeneous dispersion containing particles large enough to settle or be separated
synthesis — formation of a chemical compound from other substances

Chemical Elements That Start With S

There are nine current chemical element names beginning with S:

Element Symbol Atomic number
Samarium Sm 62
Scandium Sc 21
Seaborgium Sg 106
Selenium Se 34
Silicon Si 14
Silver Ag 47
Sodium Na 11
Strontium Sr 38
Sulfur S 16

They span very different parts of the periodic table, from sodium in group 1 to silicon in group 14, sulfur in group 16 and the lanthanide samarium.

Samarium

Samarium is a chemical element with:

Symbol: Sm
Atomic number: 62
Series: lanthanide

It is one of the elements commonly grouped as the rare earths.

Samarium has applications in:

permanent magnets
specialised alloys
nuclear technology
optical materials

One important class of magnets combines samarium with cobalt.

Scandium

Scandium has:

Symbol: Sc
Atomic number: 21
Group: 3

It is a lightweight metal that occurs only in relatively low concentrations in most ores.

Scandium is used in specialised aluminium alloys and lighting technologies.

Its chemical behaviour shares some similarities with both transition metals and the rare-earth elements.

Seaborgium

Seaborgium is a synthetic element with:

Symbol: Sg
Atomic number: 106

It is highly radioactive and does not occur naturally in macroscopic quantities.

Seaborgium was named after chemist Glenn T. Seaborg, who made major contributions to the chemistry of transuranium elements.

Its chemistry is studied using very small numbers of atoms produced in nuclear reactions.

Selenium

Selenium has:

Symbol: Se
Atomic number: 34
Group: 16

It belongs to the same periodic-table group as oxygen, sulfur and tellurium.

Selenium has important uses in:

electronics
glassmaking
photovoltaics
chemical manufacturing

It is also biologically essential in very small amounts, although excessive exposure can be harmful.

Silicon

Silicon is a chemical element with:

Symbol: Si
Atomic number: 14
Group: 14

It is one of the most abundant elements in Earth’s crust, mainly occurring in compounds rather than as free elemental silicon.

Silicon is central to:

semiconductors
glass
ceramics
silicones
solar cells

Elemental silicon should not be confused with silicone, which refers to a family of polymers containing silicon-oxygen backbones.

Silicon vs Silicone

These words are frequently confused.

Silicon is the element Si.

Silicone refers to polymers and other materials containing repeating silicon-oxygen structures with organic groups attached.

Silicone sealants, cookware and medical materials therefore contain silicon chemically, but they are not simply elemental silicon.

Silver

Silver is an element with:

Symbol: Ag
Atomic number: 47

The symbol Ag comes from the Latin name argentum.

Silver has the highest electrical conductivity of any elemental metal under ordinary conditions and is used in:

electronics
contacts
mirrors
photography
jewellery
specialised chemical applications

Silver also forms several important compounds, including silver nitrate.

Silver Nitrate

Silver nitrate, formula:

AgNO₃

is a common laboratory silver compound.

It is particularly familiar from tests involving halide ions.

For example, silver ions can form precipitates with:

chloride
bromide
iodide

producing silver halides with characteristic appearances.

Silver nitrate solutions should be handled carefully because they can stain skin and other materials.

Sodium

Sodium has:

Symbol: Na
Atomic number: 11
Group: 1

It is an alkali metal.

Its symbol Na comes from the Latin-derived name natrium.

Elemental sodium is soft, highly reactive and reacts vigorously with water.

Most sodium encountered in everyday life, however, is present as stable ionic compounds rather than metallic sodium.

Sodium Chloride

Sodium chloride, NaCl, is common salt.

In the solid state, it consists of sodium and chloride ions arranged in an ionic crystal lattice.

When dissolved in water, it dissociates extensively into:

Na⁺

and:

Cl⁻

This makes aqueous sodium chloride a strong electrolyte.

Sodium Hydroxide

Sodium hydroxide, NaOH, is a strong base.

It is also known as:

caustic soda

It is widely used in:

chemical manufacturing
soap production
cleaning products
pH control

Concentrated sodium hydroxide is highly corrosive.

Sodium Carbonate

Sodium carbonate, Na₂CO₃, is also called soda ash.

It is used in:

glass manufacturing
water treatment
detergents
chemical production

The older WordsDetail page lists soda ash but gives no explanation. It is much more useful to connect the common name to the actual compound.

Strontium

Strontium has:

Symbol: Sr
Atomic number: 38
Group: 2

It is an alkaline-earth metal.

Strontium compounds are especially familiar for producing red colours in fireworks and flares.

The element was named after Strontian, a village in Scotland.

Sulfur

Sulfur is a chemical element with:

Symbol: S
Atomic number: 16
Group: 16

It is a yellow non-metal under ordinary conditions.

Sulfur is found in:

minerals
petroleum and natural gas compounds
amino acids
proteins

It is also industrially important because enormous quantities are used to manufacture sulfuric acid.

Sulfur or Sulphur?

Both spellings have long histories in English.

However, sulfur is the spelling adopted by IUPAC for the element name.

Sulphur remains common in British English outside strict chemical nomenclature.

For a chemistry reference page, I would use sulfur consistently while acknowledging the alternative spelling.

Sulfuric Acid

Sulfuric acid, H₂SO₄, is one of the most important industrial chemicals.

It is used in:

fertiliser production
petroleum refining
metal processing
chemical synthesis
battery chemistry

Concentrated sulfuric acid is strongly corrosive and also has powerful dehydrating properties.

Sulfur Dioxide

Sulfur dioxide, SO₂, is a colourless gas with a pungent odour.

It is produced when sulfur-containing materials are burned and is an important atmospheric pollutant.

SO₂ is also an intermediate in industrial sulfuric-acid production.

Sulfur Trioxide

Sulfur trioxide, SO₃, is an important intermediate in the manufacture of sulfuric acid.

In the Contact process, sulfur dioxide is oxidised:

2SO₂ + O₂ ⇌ 2SO₃

The reaction is catalysed industrially, commonly using vanadium-containing catalysts.

Sulfate

Sulfate is the polyatomic ion:

SO₄²⁻

Examples of sulfate compounds include:

sodium sulfate
copper(II) sulfate
magnesium sulfate

The sulfur atom in sulfate has a formal oxidation state of +6.

Sulfite

Sulfite is:

SO₃²⁻

It contains one fewer oxygen atom than sulfate.

Sulfite compounds are used in areas including food preservation, water treatment and chemical processing.

Do not confuse:

sulfate — SO₄²⁻

with:

sulfite — SO₃²⁻

Sulfide

Sulfide commonly refers to compounds containing sulfur in the −2 oxidation state.

A simple example is sodium sulfide:

Na₂S

Metal sulfides are important in mineral chemistry because many metal ores occur naturally as sulfide minerals.

Salt

In chemistry, a salt is much broader than table salt.

Salts are ionic compounds containing positively and negatively charged ions.

Examples include:

sodium chloride, NaCl
potassium nitrate, KNO₃
copper(II) sulfate, CuSO₄

Many salts can be produced through acid-base reactions, although salt formation is not limited to neutralisation.

Salt Bridge

A salt bridge allows ionic movement between half-cells in an electrochemical cell.

Its purpose is to maintain electrical neutrality while allowing the redox reaction to continue.

Without ionic communication between the half-cells, charge would quickly build up and oppose continued electron flow.

A salt bridge may contain an electrolyte such as potassium nitrate in a gel or porous medium.

Saponification

Saponification is the hydrolysis of an ester under basic conditions.

The term is especially associated with soap making.

Fats and oils contain triglyceride esters. Reaction with a strong base such as sodium hydroxide can produce:

glycerol

and:

fatty-acid salts

Those fatty-acid salts are soaps.

A simplified reaction can be written:

triglyceride + base → glycerol + soap

Saturated

The word saturated has several different meanings in chemistry.

In organic chemistry, a saturated molecule contains the maximum number of hydrogens consistent with its carbon skeleton and contains no carbon-carbon multiple bonds.

In solution chemistry, a saturated solution contains the equilibrium amount of dissolved solute under the stated conditions.

The meaning therefore depends entirely on context.

Saturated Hydrocarbon

A saturated hydrocarbon contains only carbon-carbon single bonds.

Alkanes are the main example.

Examples include:

methane
ethane
propane
butane

An alkene or alkyne is unsaturated because it contains carbon-carbon multiple bonds.

Saturated Solution

A saturated solution contains the equilibrium amount of dissolved solute under specified conditions.

If additional solid solute is present, dissolution and crystallisation can occur at equal rates once equilibrium is established.

Temperature is particularly important because solubility often changes with temperature.

Supersaturated Solution

A supersaturated solution contains more dissolved solute than would normally be present at equilibrium under the same conditions.

Such a solution is metastable.

Crystallisation may occur suddenly if the solution is disturbed or seeded with a crystal.

Compare:

unsaturated — more solute can dissolve

saturated — equilibrium limit reached

supersaturated — more dissolved than the stable equilibrium amount

Salinity

Salinity describes the amount of dissolved salts in water or another solution.

It is particularly important in:

environmental chemistry
ocean chemistry
water treatment

Salinity is not simply the concentration of sodium chloride.

Natural waters contain many dissolved ions.

Sedimentation

Sedimentation is the settling of particles under gravity or another force.

It appears in:

analytical chemistry
water treatment
colloid science
separation processes

The rate of sedimentation depends on properties including:

particle size
particle density
fluid viscosity

Ultracentrifugation accelerates a related separation process using very high centrifugal forces.

Semimetal

The older page lists semi-metal.

In modern chemistry, metalloid is more commonly used for elements with properties intermediate between conventional metals and non-metals, although terminology is not completely uniform.

Silicon is a familiar example commonly described as a metalloid.

I would therefore avoid presenting semimetal as though it were one precisely defined universal chemical category.

Shell

An electron shell groups atomic orbitals with the same principal quantum number.

Shells are labelled by:

n = 1, 2, 3, …

Each shell contains one or more subshells.

For example:

n = 2 contains:

2s

and:

2p

subshells.

Subshell

A subshell is a subdivision of an electron shell.

The familiar types are:

s
p
d
f

Their capacities are:

s — 2 electrons
p — 6 electrons
d — 10 electrons
f — 14 electrons

These structures are central to understanding electron configurations and periodic trends.

Spin

Spin is an intrinsic quantum property of particles.

For electrons, the spin quantum number is:

s = 1/2

and a particular spin projection is commonly represented as:

mₛ = +1/2

or:

mₛ = −1/2

Spin is not literally an electron rotating like a tiny classical ball.

It is a quantum-mechanical property with no exact classical equivalent.

Spin Quantum Number

In introductory chemistry, the spin quantum number usually refers to the two possible spin projections assigned to an electron.

These are commonly written:

+1/2

and:

−1/2

The Pauli exclusion principle means that two electrons sharing the same orbital must differ in spin projection.

Sigma Bond

A sigma bond, written σ bond, is formed through orbital overlap along the internuclear axis.

Single bonds are generally sigma bonds.

For example, the bond in H₂ is a sigma bond.

A carbon-carbon double bond consists of:

one sigma bond

and:

one pi bond.

A triple bond consists of:

one sigma bond

and:

two pi bonds.

Sigma bonds therefore form the basic bonding framework of many molecules.

Single Bond

A single bond has formal bond order one.

A typical covalent single bond consists of one shared electron pair.

Examples include:

H–H

C–C

C–H

A single bond is not necessarily weaker than every multiple bond in every meaningful comparison, but increasing bond order between the same pair of atoms generally leads to shorter, stronger bonding.

Skeletal Formula

A skeletal formula, also called a line-angle formula, is a shorthand way of drawing organic structures.

Carbon atoms are implied at:

line ends

and:

line intersections.

Hydrogens attached to carbon are usually omitted.

For example, a simple zig-zag chain can represent a hydrocarbon without writing every carbon and hydrogen explicitly.

Skeletal formulas become indispensable once organic molecules grow beyond a few atoms.

Solid

A solid is a state of matter with structural rigidity and resistance to changes in shape.

Solids may be:

crystalline

or:

amorphous

In a crystalline solid, atoms, ions or molecules exhibit long-range order.

In an amorphous solid, long-range crystalline order is absent.

Glass is a familiar example of an amorphous solid.

Solidification

Solidification is the phase transition from liquid to solid.

For a pure crystalline substance at a given pressure, melting and freezing occur at the same equilibrium temperature.

However, practical materials may show more complex behaviour because of:

mixtures
supercooling
crystallisation kinetics
impurities

Sol

A sol is a colloidal system in which solid particles are dispersed in a liquid.

Examples may include certain:

paints
inks
colloidal metal dispersions

The word belongs to colloid chemistry rather than ordinary solution chemistry.

A sol should not be confused with a true molecular solution.

Solubility

Solubility describes the composition of a saturated solution for a specified solute and solvent under defined conditions.

It may be expressed using quantities such as:

concentration
molality
mole fraction

Solubility depends on factors including:

temperature
pressure
solvent
chemical form

Saying simply that a substance is “soluble” or “insoluble” gives less information than an actual solubility measurement. IUPAC defines solubility in terms of the composition of a saturated solution.

Solubility Product

The solubility product, commonly written Ksp, is an equilibrium constant associated with dissolution of a sparingly soluble ionic solid.

For:

AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)

the simplified expression is:

Ksp = [Ag⁺][Cl⁻]

under the usual introductory assumptions.

Ksp is an equilibrium constant, not simply another name for solubility.

The two are related but are not numerically identical in general.

Solute

A solute is a component treated as being dissolved in a solution.

For example, in salt water:

sodium chloride is commonly described as the solute;

water is the solvent.

The distinction becomes less obvious when two components are present in similar quantities, but it remains useful for ordinary solution chemistry.

Solvent

A solvent is the medium in which one or more solutes are dissolved.

Common solvents include:

water
ethanol
acetone
hexane
toluene

Solvents can be classified in several ways, including:

polar vs non-polar

and:

protic vs aprotic.

The choice of solvent can strongly influence chemical reactions and solubility.

Solution

A solution is a homogeneous mixture.

Although people often picture a solid dissolved in a liquid, solutions can involve different phases.

Examples include:

salt in water
ethanol in water
air as a gas mixture
certain solid alloys

The defining idea is homogeneity at the relevant scale rather than the physical state of the components.

Aqueous Solution

An aqueous solution is a solution in which water is the solvent.

Chemical equations commonly use:

(aq)

to indicate an aqueous species.

For example:

Na⁺(aq)

represents sodium ions dissolved in water.

Stock Solution

A stock solution is a relatively concentrated solution prepared or stored for later dilution.

For example, a laboratory might prepare:

1.00 mol/L NaCl stock solution

and dilute part of it to make:

0.100 mol/L working solution

Using a stock solution improves convenience and consistency.

Standard Solution

A standard solution has an accurately known concentration.

It can be used in:

titration
instrument calibration
quantitative analysis

A standard solution may be prepared directly from a suitable primary standard or standardised against another known substance.

Standardisation

Standardisation is the process used to determine the exact concentration of a solution.

For example, a sodium hydroxide solution may be approximately prepared and then standardised by titrating it against a primary-standard acid.

This gives a more reliable concentration than simply assuming the preparation produced exactly the intended value.

Primary Standard

A primary standard is a highly pure, stable substance suitable for preparing or standardising solutions accurately.

Useful properties can include:

high purity
known composition
stability in air
sufficient molar mass
low hygroscopicity

Not every pure chemical is automatically a good primary standard.

Spectator Ion

A spectator ion is present in a reaction mixture but does not undergo the net chemical change being represented.

For example:

AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)

The net ionic reaction is:

Ag⁺ + Cl⁻ → AgCl(s)

The sodium and nitrate ions are spectators.

They remain in solution without being changed by the precipitation reaction.

Spectrometer

A spectrometer is an instrument that measures a spectrum or separates and records quantities according to a spectral variable.

The exact instrument depends on the technique.

Examples include:

mass spectrometers
NMR spectrometers
optical spectrometers

The word spectrometer therefore describes a broad instrument category rather than one single machine.

Spectrophotometer

A spectrophotometer measures light intensity as a function of wavelength, often comparing light before and after it passes through a sample.

Common applications include:

UV–Vis spectroscopy
concentration measurement
reaction monitoring

The Beer–Lambert law is often used with spectrophotometric measurements under suitable conditions.

Spectroscopy

Spectroscopy is the study of spectra and interactions between matter and radiation or other energy-related signals.

Major chemical spectroscopy methods include:

infrared spectroscopy

UV–Vis spectroscopy

NMR spectroscopy

Raman spectroscopy

X-ray spectroscopy

Different techniques probe different molecular or atomic properties.

Spectroscopy is one of the most important ways chemists identify substances and investigate molecular structure.

Spectrum

A spectrum is a representation showing how a measured signal varies across a quantity such as:

wavelength
frequency
energy
mass-to-charge ratio

For example:

an IR spectrum plots absorption-related signal against wavenumber;

an NMR spectrum plots signal against chemical shift.

The plural is spectra.

Specific Heat Capacity

Specific heat capacity is the amount of heat required to raise the temperature of unit mass of a substance by one degree.

In SI units it can be expressed as:

J kg⁻¹ K⁻¹

Water has a relatively high specific heat capacity compared with many common materials.

This is one reason large bodies of water moderate temperature changes.

Specific Gravity

Specific gravity is a dimensionless ratio comparing the density of a substance with the density of a reference material.

For liquids and solids, water is commonly used as the reference under specified conditions.

Because it is a ratio of like quantities, specific gravity has no unit.

Modern technical work often uses relative density as the more precise term.

Spontaneous Process

A spontaneous process is thermodynamically capable of proceeding in a specified direction under the given conditions without continuous external driving.

Spontaneous does not necessarily mean fast.

For example, some thermodynamically favourable reactions occur extremely slowly because they face large kinetic barriers.

Under constant temperature and pressure, Gibbs energy is commonly used:

ΔG < 0

for a thermodynamically favourable process as written.

Spontaneous Fission

Spontaneous fission is a form of radioactive decay in which a heavy nucleus splits into two or more smaller nuclei without first absorbing a neutron.

It occurs for some very heavy nuclides.

This is a nuclear process rather than an ordinary chemical reaction.

Standard Hydrogen Electrode

The standard hydrogen electrode, abbreviated SHE, is the reference against which standard electrode potentials are defined.

Its standard electrode potential is assigned:

0 V

The conventional setup involves hydrogen gas and hydrogen ions with a platinum electrode under defined standard conditions.

In practical electrochemistry, other reference electrodes are often more convenient, but SHE remains the fundamental reference in tables of standard electrode potentials.

Standard Electrode Potential

A standard electrode potential describes the potential of an electrode relative to the standard hydrogen electrode under defined standard-state conditions.

Tables often list standard reduction potentials.

A more positive reduction potential generally indicates a stronger tendency for the species to be reduced under the specified standard conditions.

Actual cell potentials under non-standard conditions require additional treatment, such as the Nernst equation.

Standard State

A standard state is a defined reference state used in thermodynamic quantities.

The exact standard-state convention depends on whether the substance is:

gas
pure liquid
pure solid
solute

A standard state is not simply another name for STP.

This distinction matters.

STP

STP means standard temperature and pressure, but the exact convention has varied historically.

For this reason, chemistry writing should specify the actual temperature and pressure whenever precision matters.

STP also should not be confused with the thermodynamic concept of a standard state.

Steam Distillation

Steam distillation is a separation method in which steam assists the distillation of substances that may have high boiling points or limited water solubility.

It is particularly useful for volatile organic compounds such as components of essential oils.

The presence of water can allow distillation at temperatures below the normal boiling point of the organic compound alone.

Steel

Steel is an alloy based principally on iron with carbon and often other alloying elements.

Different steels contain different amounts of:

carbon
chromium
nickel
manganese
molybdenum
vanadium

and other elements.

Steel therefore is not one pure chemical substance.

It is a broad family of materials.

Stainless Steel

Stainless steel is a family of corrosion-resistant steels containing sufficient chromium to form a protective surface oxide.

Many grades also contain:

nickel
molybdenum
other alloying elements

The word stainless does not mean the metal is completely immune to corrosion under every possible chemical condition.

Stereochemistry

Stereochemistry is the study of the three-dimensional arrangement of atoms in molecules and how that arrangement affects chemical behaviour.

Important stereochemical concepts include:

chirality
enantiomers
diastereomers
cis/trans isomerism
E/Z nomenclature
R/S configuration

Two molecules can have the same molecular formula and the same atom-to-atom connectivity yet still be different compounds because their atoms occupy different spatial arrangements.

Stereoisomer

Stereoisomers have the same molecular formula and connectivity but differ in the spatial arrangement of atoms.

Major categories include:

enantiomers

and:

diastereomers

Stereoisomerism is especially important in:

organic chemistry
medicinal chemistry
biochemistry

because three-dimensional structure can influence biological activity.

Stereoselectivity

Stereoselectivity describes the preferential formation of one stereoisomer over another in a chemical reaction.

IUPAC distinguishes:

enantioselectivity — preference between enantiomers

and:

diastereoselectivity — preference between diastereomers.

A stereoselective reaction does not necessarily produce only one stereoisomer; it produces them in unequal amounts.

Steric Hindrance

Steric hindrance occurs when the size and spatial arrangement of atoms or groups makes a reaction, conformation or interaction less favourable.

Bulky substituents can physically obstruct access to a reactive centre.

Steric effects influence:

reaction rates
conformations
substitution reactions
catalysis
molecular recognition

The term is particularly important in organic chemistry.

Steric Number

The steric number is often used in introductory VSEPR reasoning.

It usually corresponds to the total number of:

bonding regions

plus:

lone-pair regions

around a central atom.

For example, carbon in methane has steric number 4, corresponding to tetrahedral electron-domain geometry.

The term is pedagogically useful, although more advanced bonding models do not depend on it.

Stoichiometry

Stoichiometry concerns the quantitative relationships between reactants and products in a chemical reaction.

For:

2H₂ + O₂ → 2H₂O

the coefficients show that:

2 moles H₂

react with:

1 mole O₂

to produce:

2 moles H₂O

under the reaction stoichiometry.

Stoichiometry is fundamental to:

limiting-reactant calculations
theoretical yield
solution calculations
gas calculations
chemical manufacturing

IUPAC defines stoichiometry around the relationships between the amounts of substances reacting and the amounts of products formed.

Stoichiometric Coefficient

A stoichiometric coefficient is the number placed before a chemical formula in a balanced equation.

For:

2H₂ + O₂ → 2H₂O

the stoichiometric coefficients are:

2 for H₂

1 for O₂

2 for H₂O.

These numbers describe relative amounts, not necessarily the actual amount used in one particular experiment.

Stoichiometric Mixture

A stoichiometric mixture contains reactants in exactly the proportions required by the balanced reaction, with no reactant deliberately present in excess.

Real chemical processes may intentionally use excess reactant to:

drive conversion
simplify separation
control reaction conditions

so practical mixtures are not always stoichiometric.

Strong Acid

A strong acid is essentially completely ionised in water under the conditions normally being discussed.

Common examples include:

hydrochloric acid
nitric acid
perchloric acid

and the first ionisation of sulfuric acid.

Strong does not mean concentrated.

A dilute solution of a strong acid can contain less acid overall than a concentrated solution of a weak acid.

Strong Base

A strong base reacts essentially completely in water under the conditions being considered.

Common examples include soluble hydroxides such as:

sodium hydroxide
potassium hydroxide

Strength again differs from concentration.

A dilute strong base is still chemically classified as strong even though the solution contains relatively little base.

Strong Electrolyte

A strong electrolyte forms ions extensively in solution.

Examples include:

soluble ionic salts
strong acids
strong bases

Solutions containing strong electrolytes generally conduct electricity well because they contain substantial concentrations of mobile ions.

Sublimation

Sublimation is the direct transition:

solid → vapour

without passing through the liquid phase.

Dry ice provides the classic example:

solid CO₂ → CO₂ gas

Iodine and several other substances can also exhibit noticeable sublimation.

The reverse process, gas directly forming a solid, is called deposition.

IUPAC defines sublimation specifically as a direct solid-to-vapour transition without passage through the liquid phase.

Substitution Reaction

A substitution reaction replaces one atom or group in a molecule with another.

A simple general representation is:

R–X + Y → R–Y + X

Organic chemistry includes several major substitution mechanisms, including:

S_N1

and:

S_N2

Substitution also occurs in aromatic chemistry and inorganic coordination chemistry.

Substrate

A substrate is the chemical species acted upon by a reagent, catalyst or enzyme.

In organic chemistry, it is often the molecule undergoing transformation.

In biochemistry:

an enzyme acts on a substrate.

The exact use of the term depends on context, but it generally means the material being chemically transformed.

Sulfonation

Sulfonation introduces a sulfonic-acid group or related sulfur-containing functionality into a molecule.

One familiar example is aromatic sulfonation.

Benzene can undergo electrophilic substitution to form benzenesulfonic acid under suitable conditions.

Sulfonation is important in the manufacture of:

detergents
dyes
pharmaceutical intermediates
speciality chemicals

Supercritical Fluid

A supercritical fluid exists above both its:

critical temperature

and:

critical pressure.

In this region, there is no ordinary distinction between separate liquid and gas phases.

Supercritical fluids can combine properties associated with both.

Supercritical carbon dioxide is widely used in:

extraction
chromatography
materials processing

One familiar application is decaffeination.

Superconductivity

Superconductivity is the phenomenon in which certain materials show zero electrical resistance below a critical temperature, along with characteristic magnetic behaviour.

It belongs mainly to:

materials chemistry
solid-state physics
condensed-matter science

Some high-temperature superconductors are complex ceramic compounds, including the yttrium barium copper oxide materials discussed in the Y chemistry guide.

Surface Tension

Surface tension describes the tendency of a liquid surface to minimise its area because molecules at the interface experience a different balance of intermolecular forces from molecules in the bulk.

It helps explain phenomena such as:

droplet formation
capillary behaviour
wetting

Water has relatively high surface tension because of strong intermolecular hydrogen bonding.

Surfactant

A surfactant is a substance that accumulates at interfaces and alters surface or interfacial tension.

Many surfactants contain:

a hydrophilic region

and:

a hydrophobic region.

This structure allows them to interact with both water and oily substances.

Surfactants are used in:

detergents
cosmetics
emulsions
pharmaceuticals
industrial formulations

Micelle

Although micelle begins with M, it is closely related to surfactant chemistry.

Above suitable concentrations, many surfactants self-assemble into structures such as micelles.

Hydrophobic portions tend to associate away from water while hydrophilic portions remain in contact with it.

This behaviour helps detergents disperse oily material in water.

Suspension

A suspension is a heterogeneous mixture containing dispersed particles large enough that they may settle over time or be separated by filtration.

Examples include:

muddy water
some pharmaceutical formulations
solid particles dispersed in laboratory liquids

Suspensions differ from true solutions because the dispersed material is not dissolved at the molecular or ionic level.

Solution vs Colloid vs Suspension

These terms describe different types of dispersed systems.

Solution — molecularly or ionically homogeneous

Colloid — particles intermediate between molecular-scale solutes and coarse suspended particles

Suspension — larger dispersed particles that may settle or be filtered

The boundaries are not always as visually obvious as textbook diagrams suggest, but the distinction is chemically useful.

Synthesis

Synthesis means constructing a chemical substance from other chemical substances.

Organic synthesis, for example, may involve a sequence of reactions that transforms simple starting materials into a complex target molecule.

Synthesis can include:

bond formation
functional-group conversion
protection and deprotection
purification

A successful synthesis is not merely a reaction that forms some product; chemists also care about:

yield
selectivity
purity
cost
safety
scalability

Synthetic

Synthetic means produced through chemical or industrial processes rather than obtained directly in its final form from a natural source.

It does not automatically mean:

toxic
inferior
unnatural in molecular structure

A synthetic molecule can be chemically identical to the same molecule isolated from nature.

Chemistry distinguishes substances primarily by molecular identity and composition, not by whether a person or organism made them.

S Chemistry Words at a Glance

Term Meaning or use
Salt Ionic compound made from cations and anions
Salt bridge Ionic connection between electrochemical half-cells
Salinity Amount of dissolved salts
Samarium Element 62, Sm
Saponification Base-promoted ester hydrolysis
Saturated Fully saturated structure or equilibrium solution state
Saturated solution Solution at equilibrium solubility
Scandium Element 21, Sc
Seaborgium Element 106, Sg
Sedimentation Settling of dispersed particles
Selenium Element 34, Se
Shell Set of orbitals sharing principal quantum number
Sigma bond Bond formed along internuclear axis
Silica SiO₂
Silicate Silicon-oxygen-containing compound
Silicon Element 14, Si
Silver Element 47, Ag
Silver nitrate AgNO₃
Single bond Bond of formal order one
Skeletal formula Line-angle structural representation
Sodium Element 11, Na
Sodium carbonate Na₂CO₃
Sodium chloride NaCl
Sodium hydroxide NaOH
Sol Solid-in-liquid colloidal dispersion
Solid Rigid state of matter
Solidification Liquid-to-solid transition
Solubility Composition of a saturated solution
Solubility product Equilibrium constant for sparingly soluble solids
Solute Dissolved component
Solution Homogeneous mixture
Solvent Dissolving medium
Specific gravity Relative density
Specific heat capacity Heat needed per unit mass per degree
Spectator ion Ion unchanged in net reaction
Spectrometer Instrument measuring a spectrum
Spectrophotometer Instrument measuring light intensity by wavelength
Spectroscopy Study of spectra and matter-radiation interactions
Spectrum Distribution of measured signal
Spin Intrinsic quantum property
Spontaneous fission Nuclear fission occurring without neutron capture
Spontaneous process Thermodynamically favourable direction
Standard hydrogen electrode Zero-potential electrochemical reference
Standard solution Solution of accurately known concentration
Standard state Defined thermodynamic reference state
Standardisation Determination of exact solution concentration
Steam distillation Distillation aided by steam
Steel Iron-based alloy
Stereochemistry Study of three-dimensional molecular structure
Stereoisomer Same connectivity, different spatial arrangement
Stereoselectivity Preferential formation of one stereoisomer
Steric hindrance Spatial obstruction affecting chemical behaviour
Steric number VSEPR electron-domain count
Stock solution Concentrated solution used for dilution
Stoichiometry Quantitative reactant-product relationship
Stoichiometric coefficient Coefficient in a balanced equation
Strontium Element 38, Sr
Strong acid Acid essentially completely ionised under specified conditions
Strong base Base reacting essentially completely
Strong electrolyte Substance forming ions extensively
Sublimation Direct solid-to-vapour transition
Subshell Electron-shell subdivision
Substituent Atom or group replacing another group
Substitution reaction Replacement of one group by another
Substrate Species acted on in a reaction
Sulfate SO₄²⁻
Sulfide Low-oxidation-state sulfur compound
Sulfite SO₃²⁻
Sulfonation Introduction of sulfonic functionality
Sulfur Element 16, S
Sulfur dioxide SO₂
Sulfur trioxide SO₃
Sulfuric acid H₂SO₄
Superconductivity Zero-resistance state of certain materials
Supercritical fluid Fluid above critical temperature and pressure
Supersaturated solution Metastable solution above equilibrium solubility
Surface tension Interfacial tendency to minimise surface area
Surfactant Substance reducing interfacial tension
Suspension Heterogeneous dispersion of particles
Synthesis Construction of compounds from other substances

Which S Words Are Most Important for Chemistry Students?

For introductory chemistry, prioritise:

salt
saturated solution
shell
sigma bond
single bond
solid
solubility
solute
solution
solvent
specific heat capacity
spectator ion
stoichiometry
strong acid
strong base
sublimation

Organic chemistry students should also know:

saponification
skeletal formula
stereochemistry
stereoisomer
steric hindrance
substituent
substitution reaction
substrate
sulfonation

Analytical chemistry adds:

standard solution
standardisation
spectrometer
spectrophotometer
spectroscopy
stock solution

Physical and materials chemistry introduce:

surface tension
supercritical fluid
superconductivity
solidification

Which Chemical Elements Start With S?

Nine current element names begin with S:

samarium
scandium
seaborgium
selenium
silicon
silver
sodium
strontium
sulfur

What Is a Salt in Chemistry?

A salt is an ionic compound composed of cations and anions.

Table salt, sodium chloride, is one example, but chemistry contains thousands of other salts.

What Is the Difference Between Solute and Solvent?

The solute is the substance treated as being dissolved.

The solvent is the medium doing the dissolving.

Together they form a solution.

What Is Solubility?

Solubility describes the composition of a saturated solution for a specified solute and solvent under defined conditions.

It may be expressed in several concentration-related ways.

What Is the Solubility Product?

The solubility product, Ksp, is an equilibrium constant used for dissolution equilibria involving sparingly soluble ionic solids.

It is related to solubility but is not simply another word for it.

What Is Stoichiometry?

Stoichiometry deals with quantitative relationships between reactants and products based on a balanced chemical equation.

It is used to calculate moles, masses, limiting reactants and theoretical yields.

What Is a Sigma Bond?

A sigma bond is formed by orbital overlap along the line connecting two nuclei.

A single covalent bond is generally a sigma bond.

What Is Stereochemistry?

Stereochemistry studies the three-dimensional arrangement of atoms in molecules and how that arrangement affects chemical properties and reactions.

What Is a Stereoisomer?

A stereoisomer has the same atom connectivity as another molecule but a different three-dimensional arrangement.

What Is Sublimation?

Sublimation is the direct transition from solid to vapour without passing through the liquid phase.

Dry ice is the standard example.

What Is a Strong Acid?

A strong acid ionises essentially completely in aqueous solution under the conditions being considered.

Strong does not mean concentrated.

What Is a Strong Base?

A strong base reacts essentially completely to generate basic species such as hydroxide under the specified conditions.

Again, strength and concentration are different properties.

What Is a Spectator Ion?

A spectator ion remains present during a reaction but does not participate in the net chemical transformation.

What Is Spectroscopy?

Spectroscopy studies spectra produced through interactions between matter and radiation or related physical signals.

It is widely used to determine chemical structure and composition.

What Is a Standard Solution?

A standard solution has an accurately known concentration and is used for quantitative analysis or calibration.

What Is a Stock Solution?

A stock solution is usually a relatively concentrated solution kept for preparing more dilute solutions.

A stock solution does not automatically have to be a standard solution unless its concentration is known accurately.

What Is Surface Tension?

Surface tension is a property of a liquid interface arising from intermolecular interactions.

It influences droplets, capillary action and wetting.

What Is a Surfactant?

A surfactant accumulates at interfaces and reduces surface or interfacial tension.

Many surfactants contain both hydrophilic and hydrophobic regions.

What Is a Supersaturated Solution?

A supersaturated solution contains more dissolved solute than its stable equilibrium solubility under the same conditions.

It is metastable and may crystallise when disturbed.

What Is a Supercritical Fluid?

A supercritical fluid exists above its critical temperature and critical pressure, where separate liquid and gas phases are no longer distinct.

Supercritical carbon dioxide is widely used in extraction and processing.

Is Sulfur or Sulphur Correct in Chemistry?

Both spellings appear in English, but sulfur is the spelling used by IUPAC for the element.

Why Is Sodium Na?

Sodium’s symbol Na comes from natrium, a historical Latin-derived name.

Why Is Silver Ag?

Silver’s symbol Ag comes from the Latin argentum.

What Is Saponification?

Saponification is base-promoted hydrolysis of esters and is particularly associated with converting fats or oils into soap and glycerol.

Final Thoughts

S is one of the richest letters in chemistry vocabulary.

The periodic table contributes nine element names, including sodium, silicon, silver, strontium and sulfur.

Solution chemistry gives us an entire family of core terms: solute, solvent, solution, solubility, saturated solution, supersaturated solution, stock solution and standard solution.

Atomic and bonding chemistry adds shell, subshell, spin, sigma bond and single bond, while organic chemistry contributes saponification, stereochemistry, steric hindrance, substitution and sulfonation.

Analytical chemistry brings in spectroscopy, spectrometers, spectrophotometers and standardisation, and physical chemistry adds surface tension, supercritical fluids, sublimation and spontaneous processes.

That breadth is exactly why this page should not remain a bare list.

A chemistry student searching for “S chemistry words” is much better served by understanding the difference between solute and solvent, strong and concentrated, saturated and supersaturated, or stereochemistry and stereoisomerism than by seeing dozens of unexplained terms in alphabetical order.

Frequently Asked Questions

What chemistry words start with S?

Examples include salt, saturated solution, sigma bond, silicon, silver, sodium, solubility, solute, solution, solvent, spectroscopy, stereochemistry, stoichiometry, strong acid, sublimation, sulfur and surface tension.

How many chemical elements start with S?

Nine current element names begin with S: samarium, scandium, seaborgium, selenium, silicon, silver, sodium, strontium and sulfur.

What is solubility?

Solubility describes the composition of a saturated solution for a given solute and solvent under specified conditions.

What is stoichiometry?

Stoichiometry deals with the quantitative relationships between substances participating in chemical reactions.

What is a saturated solution?

A saturated solution contains the equilibrium amount of dissolved solute under the specified conditions.

What is a supersaturated solution?

A supersaturated solution contains more dissolved solute than would normally be present at equilibrium and is therefore metastable.

What is the difference between solute and solvent?

The solute is dissolved in the solvent. Together they form a solution.

What is a sigma bond?

A sigma bond results from orbital overlap along the internuclear axis.

What is stereochemistry?

Stereochemistry studies the spatial arrangement of atoms and its effect on chemical behaviour.

What is spectroscopy?

Spectroscopy studies spectra and the interaction of matter with electromagnetic radiation or related physical phenomena.

What is sublimation?

Sublimation is the direct transition of a solid into vapour without an intervening liquid phase.

What is saponification?

Saponification is base-promoted ester hydrolysis, especially the reaction used to make soap from fats or oils.

What is a spectator ion?

A spectator ion remains unchanged during the net chemical reaction.

What is a standard solution?

A standard solution has an accurately known concentration.

What is a stock solution?

A stock solution is a relatively concentrated solution kept for later dilution.

What is surface tension?

Surface tension reflects the energetic cost of increasing the surface area of a liquid interface.

What is a surfactant?

A surfactant accumulates at interfaces and reduces surface or interfacial tension.

What is sulfuric acid?

Sulfuric acid is H₂SO₄, a major industrial acid used in fertiliser production, chemical manufacturing and numerous other processes.

Is sulfur the same as sulfate?

No. Sulfur is the element S. Sulfate is the polyatomic ion SO₄²⁻.

What is the difference between sulfate and sulfite?

Sulfate is SO₄²⁻, while sulfite is SO₃²⁻.

Why is silver Ag?

Ag comes from the Latin word argentum.

Why is sodium Na?

Na comes from the historical name natrium.

Written by

V Y

V Y researches, writes and reviews language-reference content for WordsDetail, with a focus on making English vocabulary and usage easier to understand in practical contexts. Her work includes checking definitions, word classifications, spelling patterns, regional usage and examples against established dictionaries and authoritative language references where appropriate. She also reviews older WordsDetail articles for accuracy, clarity and usefulness as part of the site’s ongoing editorial updates.

About the editor